Search
0
Shopping Cart
Choose!

Y-Cables Set Universal Starter Set

Complete set with 10 Y-cables and 18 pin breakout box.

This set consists of most used connectors for all passenger cars. Attention: in this box are only Y-cables and not loose connectors.

The Y-cable or splitter cable must be connected between the sensor/actuator and the connector of the engine wiring harness connector so the sensor of the engine management system is still functioning. By connecting the 18 pin breakout box, measurement can be done in a save way regarding the signals from and to the sensor. This can be done with a multimeter or scoop. The pin numbers on the connector are identical to the numbers on the breakout box. In this way there is no longer need to pierce into wires or damage contacts inside the connector. So not leakage in the isolation (PVC) of a wire with a change for corrosion of the cupper inside of the wire and problems in future. And as last, with an unplugged connector, a sensor will not work anymore and will generate a trouble code in the ECU.

The set consists of the following parts : (You will find the pictures Y-cables at "Related products...")

574310000
574218000
575020022
575020021
575020032
575030013
575030021
575030023
575040017
575020048
575020031
575030040

Write a review

Note: HTML is not translated!
    Bad           Good

Do you have any questions about Y-Cables Set Universal Starter Set?