Training Car MPI / TSI / TDI
- Availability: On Order
- Brand: Thepra
- Product Code: 179405100
- Product viewed: 30137
Share:
Training Car MPI / TSI / TDI
This training car is a great educational tool that allows students to learn the components of the system, air conditioning system, ABS / ESP system, SRS AIRBAG system and other systems and its components, operation modes, various measurements, tests and other diagnostic procedures.
| Training Car | MPI | FSI | TSI | TDI |
| Article No. Basic model "full length" | 179405300 | 179405400 | 179405500 | 179405600 |
| Design "half". Separating cut behind the B-pillar, rear-mounted swivel castors, all electrical components of the tail in place and ready for operation (No. 179405310) | ||||
| Design "quarter". Separating cut behind the gear lever, no seats, no doors, rear-mounted swivel castors, all electrical components of the tail in place and ready for operation (No. 179405320) | ||||
| Option Motor type BMT: BlueMotion Technology, start / stop (No. 1179302150) | ||||
| Option Motor type SCR: with AdBlue tank (No. 1179302160) |
- At a glance
- Characteristics
- Fully functional, prepared training vehicle
- Complete with air conditioning, ABS / ESP system, CAN network, SRS Airbag system, etc.
- Controller error free (even with half and quarter Design)
- Possibility of exhaust examination
- Schematics, self-study program
- Optional supplements
- Available fault circuits (max. 2 fault circuits can be installed)
- Fault box engine management lockable, 12 switches, 24 fault (Item No. 179302085)
- Fault package comforts (air, door controller, etc.), 10 switches, 20 fault (with door openings) (Item No. 179302102)
- Fault package lighting, 10 switches, 20 fault (Item No. 179302104)
- Fault package CAN bus, 10 switches, 20 fault (Item No. 179302106)
- Available measurement options
- Pin-outs on almost all sensors / actuators (min. 80 pieces) of the engine, 4mm sockets in the colors of the original circuit diagram (Item No. 179302055)
- Pin-outs on the sensors / actuators for fault circuit (min. 20) of the engine, 4mm sockets in the colors of the original circuit diagram (Item No. 179302060)
- Pin-outs on the sensors / actuators for additional error package (min. 20), 4mm sockets in the colors of the wiring diagram (Item No. 179302070)
- Measuring box with all the pins of the controller (for example, 154 pieces), 4mm sockets, mounted separately and hard wired (Item No. 179301355)
- Interruption box with all pins of the controller (for example, 2 x 154 pieces), sockets with short circuit plugs and measuring interface, mounted separately and hardwired. Allows diagnosis by individually separating signals / components. In addition: Transitional and load resistor or short circuit (Item No. 179302125)
- Available options
- Parallel: Y-cable adapter set, 21 pieces, breakout box, extension cable and storage case (Item No. 138300320)
- Serial: Breakout box storage case, with adapter cables for the desired control device, for example, engine, ABS, etc. (Item No. 138300310)
- VAG-COM Diagnostic System (VCDs) - powerful diagnostic tool (Item No. 138079135)
Technical Data Version "half"
Dimensions approx.: (HxLxW)
1800 x 2900 x 1800 mm
Weight approx.: 1000 kg