Clean in Place - CIP Unit

Clean in Place - CIP Unit

Clean in Place - CIP Unit

The Armfield CIP Unit FT52 has been designed to provide additional cleaning performance for Armfield FT units and other equipment. It consists of a high flow rate stainless steel centrifugal pump mounted on a mobile frame.

Features

• Simple on/off pump control
• Stainless steel pump motor splash cover
• High-pressure hygienic flexible hoses and fittings for quick connection to Armfield equipment
• 5l stainless steel hopper for cleaning solutions 

Benefits

• Mobile unit with small footprint providing local CIP capability for pilot-scale equipment
• Produces cleaning velocities in excess of the industry standard 1.5 m/s in Armfield systems
• Capable of flow rates up to 4.0 m³/h

Description

The FT52 uses a stainless steel centrifugal pump to provide high throughputs for efficient cleaning. Achievable flow rates are dependent on the backpressure generated by the system being cleaned. Capacities up to 4.0 m³/h are achievable with low backpressure systems.

The FT52 has a small footprint and is mounted on a mobile platform, so it can easily be positioned in a lab or pilot environment to meet local CIP needs. A stainless steel splash cover protects the pump from spray during laboratory/pilot plant cleaning.

Operation is simple on/off control, which gives the maximum flow rate for efficient cleaning. Flow rates may be adjusted using a backpressure valve (not supplied).

Technical Specifications

The FT52 has been designed in accordance with CE requirements.

Centrifugal pump (0-4 bar, 300-4000 l/h)

5l feed vessel

Requirements

Single-phase electrical supply:

Ordering codes

FT52-A

Overall dimensions

Shipping specification