Suspension strut for two-wheel vehicles

Suspension strut for two-wheel vehicles

Modèle en Coupe Suspension strut for two-wheel vehicles

In two-wheel vehicles, single-tube shock absorbers are frequently used. A suspension strut with a progressive spring has been used.

Blowing or discharge of nitrogen into/out of the compensation container changes the attenuation (hard, soft).

The following can be shown:

• Compression by pressing on the suspension strut
• Device to change the spring hardness by turning the stepped sleeve on the bottom of the suspension strut of adjusting nut
• Movement of the cutaway work piston with finned valves for the pusher and tractor phase
• In the cutaway compensation container, the cutaway dividing piston (rubber membrane), in which the gas cushion can be found, can be seen.

Remarque: La documentation est seulement disponible en allemand et en anglais! Les modèles peuvent être étiquetés en français!